Configure & Install PPPoE Bsnl Broadband Adsl Modem Router
Bsnl Broadband services are offered to users who have subscribed for their landline phone and you will need to rent/buy a adsl modem in order to get started using this high speed internet connection. Here is a small tutorial on getting started installing this modem.
Connect the modem with the landline phone and the other end to your computer’s CPU/laptop. This would give you a dialog box with a message saying new hardware found, you need to install all the drivers from the installation CD provided in the modem box.
Next open your browser and enter http://192.168.1.1 in the address bar and press enter where in you will give asked for the logins to the modem in a dialog box, enter ‘admin’ ‘admin’ as the login credentials and you will be logged into the modem. Make sure you enter both the logins in small letters because the logins are case sensitive.
Go to the Advanced setup menu and click on the WAN button.
Click on the add button to create a configuration.
Enter the VPI & VCI values provides by your ISP ie bsnl broadband authorities which generally are 0 & 35 respectively.
Select the connection type as PPPoE and click on the next button.
Enter the PPPoE username & password which every bsnl broadband users are given via phone and click on next to save the configuration and you are done setting up the bsnl ADSL2+ super speed land line broadband internet connection.
Generally BSNL authorities offer a modem but i would recommend you guys to use a modem from Dlink because its far more better in terms of stable connection and speedy connectivity. Dont forget to try out getting a free modem from bsnl by using their 8Mbps internet connection
Thanks for the guide. I remember I had a terrible time when my friend had reset his modem to default.
[Reply]
Do not add @dataone.in or @ @bsnl.in in your User ID entered in the wan page. calcuttatelephones.com/dataoneinstall/menu.html
Details about most modem/routers of BSNL available here.
[Reply]
[...] of all you need to setup your broadband router after which you would need a Wireless Router which would share the internet connection to several [...]
please help mee…..
i am using DLINK MODEL:DSL-502T
can u please give me MODEM settings
actually I want to use USB also .
which is better USB or Lan
I tried many times through LAN but not succeeded
PLZ POST SETTING FOR MODEM
[Reply]
Hello
I am using a Tata Indicomm WIMAX connection. Earlier I had a BSNL broadband and had to disconnect that because I moved to a new location where BSNL broadband is not available. I just want to know whether I can use my BSNL modem (includes a wireless router) with tata indicomm wimax. I think some adapter is required other than the configuration. Any expert help would be greatlyu appreciated.
Thnx
Benitha
[Reply]
I have bsnl broadband connection and im connecting to laptop by using the wireless modem provided by BSNL ie UTstarcom but i have one problem i could not connect to my mobile phone ie Nokia N81 pl tell me how to configure in my mobile.
thanking you in anticipation
rajkamal bigala
[Reply]
I am using BSNL Broadband service (2mbps) but the problems are always there. To add insult to injury, the BSNL Customer care is almost ineffective, they are not even able to identify what is the problem!
Is there any way to determine by ourselves whether the problem (like connectivity) is arising from the telephone exchange / line OR from the broadband server. For example – If I ping the server with -t, I get milliseconds ranging from 21 to 3000+ !!! does it mean the server is causing trouble OR is there a fault in my line?
Any help will be highly appreciated.
Thanks & Best Regards
[Reply]
@harish What is the problem ?
a) No connection phone works
b) connection intermittent
c) very low speed
d) sites not accessed
e) any other.
1.Always mention your modem model.
2.In any Modem there will be a diagnostics page.
check there first.
3. See the ADSL status page showing SNR/ATTn/Mod selected/line speed etc.
usually if GDMT is selected frequent disconnections are reduced.
4.Once the modem is set, and working for a week or so there is nothing to adjust again and again.
5. If you are bold enough you can try FW update fo the modem. ( if something goes wrong you have a “Bricked” modem
and BSNL may not replace it (whether on rent or outright purchase )
6. Check speed at speedtest.net say Brisbane server and keep it as reference .
7.Use TCP/IP optimiser (and advice from speedguide.net )
[Reply]
Thanks sir for replying.
Well, my problem is there are times when an otherwise good working connection starts behaving badly. What I know is my modem settings are all right and telephone also works. Once I got to know that there was some extra “voltage” on my line.
My query is – is there any way to know where the problem started. The BSNL customer care is pathetic and they don’t tell the facts. Once there was a problem in the entire area and they gave me “instructions” to change modem settings.
To repeat my query, is there any way to determine the source of discontinuity when I have a working phone and link, correct modem settings etc.
My thanks in advance…
[Reply]
@harish
Some modems fail ,(a) even if there is a power surge ( example Mt882).(b) Bsnl server can fail.(c) some websites may not open.
[quote]I have a working phone and link, correct modem settings etc[/quote]
(d)Your Dynamic DNS changes often. Check it.
(e)Post frequency of disconnection for 24 hours. or say for 6 hours.
(f)A log is created in the modem check it.
servers fails/ modem fails/ computer freezes ( memory low )
You say all are ok and then internet connection is
disconnected.
You have not given feedback to various suggestions made.
Just reading the post and dash a reply repeating the same things AND blaming bsnl cc again does not help.
You made a point BSNL CC is “ineffective”. Now why you want to add it is “pathetic” ? In next post say bsnl cc is
“worst” etc. .
None can help without proper feed back .
[Reply]
Basavaraju is a cunt muscle…… i want to be his nightmare for next 3 months as he was for me for past 3. Finally i got the connection….now i need to configure my broasband settings. All these things started when i made the request for shift of connection.
[Reply]
hi
this is hariharan i m on bsnl home unlimited plan(chennai) i ve a smartAX MT841 modem i ve a problem ….at times my adsl link goes off i dono the reason ….its happenin at a regular intervel i cannot even stay connected for a while too . .. i ve formatted my pc and i hav kaspersky internet security also . . .i ve tried many ways but the adsl link is not stable the light goes off please hlp me as soon as u can ..
[Reply]
@hariharan.
1.See summary page. If adsl2 or adsl2+ is selected
select GDMT t413 in modem settings and uncheck them.
2. line=>>adsl splitter=PHONEPort===> all phones
for parallel connections use extra ADSl splitters for each phone in different rooms.
3. post SNR/Attn data u/l and D/L line speed
ref:calcuttatelephones.com/dataoneinstall/mdm06.html
[Reply]
hi
well i have bsnl broadband connection . the poblem with my connection is that ..it automatically gets connected to net ..without asking username and password ..this happened when i changed the username and password in WAN settings in the router .. main problem is that my utorrent is showing that the port is not forwarded …still i get a download speed of 25 to 30 kbps my modem model name is UT300R2U … please help
[Reply]
i want to know that…
how i can access internet on both my desktop pc and my laptop together at a time….
i have bsnl type 2 modem i.e ZTE ZXDSL 531B wifi modem..
please tell me the configuration…
[Reply]
I am having a dell table top computer with VISTA operating system. I have a BSNL Broadband connection. It was given through modem purchased by me . The modem is UT-300R. Recently i got magiclock phone from abroad. When I tried to connect magiclock and talk to Us, I am unable to get the other party and talk to them. When the same magiclock was tried with another BSNL BROADBAND CONNECTION AND A DIFFERENT MODEL MODEL IT WORKS PERFECTLY. i WAS TOLD THAT THE SOFTWARE IN THE MODEM IS TO BE TUNED FOR THIS PURPOSE.KINDLU GUIDE ME
[Reply]
calcuttatelephones.com/dataoneinstall/mdm01.html
The difference could be Dialup”bridged” mode and “AlwaysOn”ppp/PPPoE.
Enable DHCP in your modem.
[Reply]
i use bsnl connection but its very slow after many complaints also there is no action taken i got my modem by my self and fixed it the model no is ut starcom ut-300r plz help me cause the officials deny helping me because of the modem
[Reply]
Hi there..
please do reply to this very urgently.
I have a Siemens modem which those BSNL guys gave me. I have been using it to run broadband on my desktop using the LAN port (Ethernet cable). today my uncle asked me to connect the same internet to laptop and I did the same stuff. Connected the ethernet cable to the LAN port of laptop but unfortunately no green light could be seen on the ethernet port which I can see when I connect the ethernet cable to my CPUs ethernet port.
I did the same settings to laptop but whenever I enter 192.168.1.1 in address bar of explorer then it says page cannot be displayed.
What is the actual problem??
I don’t ever install any drivers in my system for this modem to run and I didn’t even get any driver CD too..
what am I missing?
atleast the LED of ethernet port should glow when I connect the ethernet cable to that port??
please do reply soon
[Reply]
by the way I have seimens C2110 modem
[Reply]
@salman
calcuttatelephones.com/dataoneinstall/mdm09.html
Enable DHCP and enter 192.168.1.1 to 192.168.1.20
In TCP/IP properties select Obtain Ip address automatically.
http://i33.tinypic.com/2e4cc49.jpg
[Reply]
thanks for your quick answer
The major problem is that the LED in Ethernet port isn’t glowing. I am talking about the green LED that glows when you insert the connector to the Ethernet port.
When I insert that wire into the Ethernet port of laptop then the green LED doesn’t glows but when I insert the same into the Ethernet port of my desktop then it glows!!
so whenever I enter 192.168.1.1 in the address bar then it says that it cannot open the page as it isn’t accepting the wire into the port. I just don’t know why??
I think the wires are universal all around the planet??right?
any suggestions?
[Reply]
@salman
The wire is Rj45 cat 5 .( 8 wires) modem to Computer Ethernet port.
Another Telephone type Port not to be used ( if present. that is for Dialup old 56K modem use )
You have not confirmed the changes I suggested have been made.
you have repeated the problem again.
Presume Laptop you can access the modem settings.
In desktop computer type in TCP/IP
192.168.1.4
subnet 255.255.255.0
Default gateway 192.168.1.1
Dns 208.67.220.220. and 208.67.222.222 OpenDNS.
Save.
OR
Simply see the setting in TCP/IP properties page in Laptop !
IP address should be different for different computers.
[Reply]
@salman
reverse the connector! a loose connection can create lot of problems.
Use extra rj45 cables.
[Reply]
Yes good information…but Bsnl now a days giving this configuration in the modem installer cd package itself…
I have a hard time yesterday early morning when i changed my password in the service but forgot to change it in the Wan service
[Reply]
@dinesh
To avoid frequent disconnections try/choose GDMT mod mode.
Check your connections. Specially all phones AFTER the ADSL splitter.
[Reply]
Hello,
Can you tell me how to configure BSNL type II modem:
Model no: DNA-A211-1
I have the following problem:
It says connected but I’m not able to access the internet.
PWR, DSL, WLAN lights light up green.
Signal strength is excellent.
[Reply]
@sakthi
Follow any wireless modem/router instructions.
calcuttatelephones.com/dataoneinstall/menu.html
Use DNs 208.67.220.220 and 208.67.222.222
You can see this web site also. with screen shots.
chennai.bsnl.co.in/BBS/WA3002G4.htm#Wireless_security
[Reply]
sir a m using zte ZXDSL 531B modem on is there any option to multipal coumputer plz tell me
thankyou.
[Reply]
@abhiroup
Try this site
rajasthan.dotindia.com/main/procedurebb.htm
To connect many computers you have to enable DHCP. Then connect from LAN1 Lan2 etc to different computers.
In those computers in TCP/IP properties check Obtain IP address automatically.
[Reply]
Cant I connect to internet by multiple laptops with ZXDSL T2 modem. the problem is if one gets connected the other one doesnt connect with internet.
[Reply]
I am using BSNL Broadband UL 750 Plus plan. Every night I keep my broadband connection on to download large files. Now at first both the Link light and Ethernet light keeps blinking very fast and I can see data downloading at 25-30 kbps. But when I get up in the morning to check, I see that all the lights are steady and there is no donwload activity (although the LAN connection is active). Tried with 2 different laptops – same result. When I restart my modem, it starts working again.
[Reply]
Hello……
Can you tell me how to configure BSNL ITI(DNA-A211-1) modem:
Model no: DNA-A211-1
I have the following problem:
When I connect the laptop through WLAN, it displayed limited or no connectivity, through LAN its working. Signal strngth are ok. How to configure the WLAN in this type of router.
[Reply]
hi
how do you connect to the internet wirelessly
i have an unlimited home broadband and used to connect to the internet with my pc through ethernet using a username and password.
now i have got a laptop with wifi and vista on it.
i can connect the laptop with the modem but i dont know how to connect to internet after that.
where do i have to enter the username and password ??
my modem is zxdsl 531B
thanking you in advance
[Reply]
@ Arvind – Read our Setting up wireless internet at home/office guide for this http://www.amitbhawani.com/blog/setting-up-secure-homeoffice-wireless-network-wifi-zone/ which can help you setup a wifi home at your home for cheap, around 1500Rs total cost.
[Reply]
@arvind
Please go through the blog see my reply dated 2nd nov 2008
Your modem router is identical to wa3002-g4
Try this site
rajasthan.dotindia.com/main/procedurebb.htm
To connect many computers you have to enable DHCP. Then connect from LAN1 Lan2 etc to different computers.
In those computers in TCP/IP properties check Obtain IP address automatically.
[Reply]
Hello
I have a bsnl-provided modem (Sterlite SmartAX MT882) whose Lan port is not working. When i use it to connect it to the computer, it says Limited or no coonectivity (The modem works fine when connected with the Usb port)
I now need the lan port to connect it to an external device (net phone) that uses Lan ports only.
So should i replace the modem or can it be repaired? Are there any optons to connect the Usb port to the external Lan port ?
Thank u & Have a nice day,
Hemanth
[Reply]
Guys someone pls help me.Got connected with a BSNL HOME UL700 plan with an ITI DNA-211 modem.The thing is every time the modem is switched OFF and back ON the PPPoE settings gets reset(UNAME:multiplayer PWD:password)also all other settings turn back to DEFAULT (NAT,Wireless…otherwise it works fine).Also the option to Restore a backed up setting is not working(After selecting the saved settings file it says “Page not available”).
I guess the firmware is corrupt(in that case where to find the firmware) or something.I will be much grateful if you can bail me out of this one.Also i’m from Madurai(TN).
[Reply]
I was using a UTStarcom 200R2U or something like that, that I bought from BSNL. It worked completely fien for 14 months, but one day the modem started rebooting. I asked BSNL about this and the reply was that the 1yr has expired and they are not responsible now. It is having broadcom chip. I am now currently using a Nokia-Seimens modem that they supplied on hire basis(not to do the fault again of buying a modem from them).Its working fine till date and I am having no problems. I want to ask is the faulty modem repairable.
[Reply]
This is aspecial asked to a gental man named “essbebe” cause everyone can see he is the SOLUTIONIST. Ok back to the point i recently have an BSNL broadband connection (Model ZXDSL831A2 from the Chines manufacturer ZTE) but it is not giving enough downloading speed(Its only 30 kbps). Friends near my home gets awesome download speed upto 400 kbps with the same connection plan from BSNL. So i called the technicians from BSNL. But they cant do anything. They advice me to change my RAM(which is 256 MB). So please guide me the right way……THANK U SIR
[Reply]
Hello pls, every one notice me and pls guide the right way cause i have search 7 hours continues, n im gonna be mad now. Plea…se
[Reply]
@Mr Right.
Thanks for the nice words. As I am active in other forum/s ,there could be some delay in replying in this Blog site.I would advise you to see the author’s @amitbhavani’s link given here.
http://www.amitbhawani.com/blog/solution-slow-no-connection-bsnl-broadband/
You could visit speedguide.net and download TCP/IP
optimizer and use default values suggested there.
D/L max possible (*conditions apply)
2Mbps 256KB/sec in one minute 15MB file D/L
256kbps 32KB/sec in one minute 2 MB appr file.
Check your speed at speedtest.net say Mumbai server.
Uncheck all other applications appearing in Task Bar.
Keep only Antivirus and Firewall program/s.
Mention your tariff plan.
[Reply]
@shuv
Modem ut300R2U
Please reset the modem with power on.
See instructions for settings here.
calcuttatelephones.com/dataoneinstall/mdm04.html
Type in IE 192.168.1.1/main.html admin admin
Check the Diagnostics page AND REPORT RESULT.
OAMF5 2 ENTRIES may show fail. Ignore .
[Reply]
My terrif plan is Home 500.
And SIR i try first link first it is about changing LAN property(IP/TCP) but it couldn’t make any improovement in downloading speed. Then i try speedguide.net and download a TCP optimizer and set it to optimal settings but it couldn’t make any change.
When i go for speedtest.net the result were as under:
Fastest Download: 381 kb/s
Fastest Upload: 291 kb/s
Average Download: 381 kb/s
Average Upload: 291 kb/s
But with dataone.in site, the results were below:
Your Current Bandwidth Reading: 205.80kbps
(Download Rate at 25.73 KB/sec)
And taht is the correct speed coz when i start download IE7 from microsoft website, it only gives 25 kbps speed.
Last link provides correct configuration but my modem ZXDSL 831AII is well cofigured and working properly.
Sir, below are the test result by speedguide.net TCP/IP Analyzer:
TCP properties for IP = 117.198.186.53 (117.198.186.53)
Browser/OS = Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 2.0.50727)
Notes: Read the Analyzer FAQ if the above is not your IP address.
TCP options string = 0204056401010402
MTU = 1420
MTU is not fully optimized for broadband. Consider increasing your MTU to 1500 for better throughput. If you are using a router, it could be limiting your MTU regardless of Registry settings.
MSS = 1380
MSS is not optimized for broadband. Consider increasing your MTU value.
Default TCP Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 65535
Note: TCP 1323 Options need to be enabled for RWIN over 2^16 (65535).
For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
63480 (up to 2 Mbit lines, depending on latency. MSS * 46)
126960 (1-5 Mbit lines, depending on latency. MSS * 46 * 2)
253920 (2-14 Mbit lines, depending on latency. MSS * 46 * 2^2)
507840 (8-30 Mbit lines, depending on latency. MSS * 46 * 2^3)
1015680 (25-60 Mbit lines depending on latency. MSS * 46 * 2^4)
bandwidth * delay product (Note this is not a speed test):
Your TCP Window limits you to: 2621 kbps (328 KBytes/s) @ 200ms
Your TCP Window limits you to: 1049 kbps (131 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 104 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)
[Reply]
Hi..
I newly bought this type2 modem..I want to know how to have a wireless connection for my laptop..without using lan or any other systems…
using WiFi…Please help me..
[Reply]
BSNL sucks…
[Reply]
How can I check whether my Broadband connection always on or not??
and is it possible to check the setup???
[Reply]
please tell me aboutthat can ADSL 2+ modem/router can install in vista
[Reply]
how to configer static ip to access my computer remotely. modem is nokia siemens c2110. the exchange people not helping
[Reply]
Hi all.
I got a stupid Wireless enabled DNA-A211-I.. from ITI manufacturers of Bangalore. The router is very unstable and resets its settings every 24 hours or so and there seems to be some problem in getting the even simplest settings to be retained. Maybe some memory leaks or something like that.. But im sure there are chances that a firmware upgrade may do the job..
So I request if anyone got links to firmware for this model of my roouter provided by BSNL.
Thanks..
PS> Tried google , but no hope. Tried BSNL customer care for lot of times but they are noobs. They dont understand…
[Reply]
@mohamed_irfan
[quote]stupid Wireless enabled DNA-A211-I.[/quote]
If you have scanned this blog page properly, from
the beginning you would have got my earlier reply regarding
this “stupid” modem/router.
Try these site/s
chennai.bsnl.co.in/BBS/WA3002G4.htm
mp.bsnl.co.in/bb/wa3002g4/wa3002g4.htm
If your problem not still solved, post device status page
screenshot or details here.
[Reply]
@mohammed_irfan
DNA A211 modem/wifi router is marketed by
SEM INDIA Bangalore.
This is using same board as Beetel 450BX1/WA3002_g4/
siemens sl2_141 Baton etc.
I have compared the Device status
pages and other settings .
If you need FW contact the company direct.
They have not posted any Quick User manual , or
full manual or FW details USB driver/s etc.
If you get it please don’t forget to upload
and post the link here.
Usually GDMT will stablise the connection.
[Reply]
@essbebe
If you did scan MY previous post here , you would have noticed that I am not asking for instructions to setup the modem.
Btw , I exactly am configuring the settings in my modem like that. But whatever you do, the settings dont get saved.
for eg , If i change the password of my modem to something else , and reboot the modem , the password will be the default itself. I mean nothing gets saved on my modem… the problem emerged recently without any misconfiguration…
I think the memory needs to be flashed or something like that..
So what do you think essbebe?
PS:> Later , BSNL tech staff came in and couldnt solve it but said would experiment on it.
[Reply]
@mohamed_irfan
Problem : ModemDNA A 211:
Modem new access password not saved.
Did you download the full user manual from MP site?
[Reply]
@essbebe
No I havent downloaded. Btw, whats MP site.
Plus : NOT ONLY modem passwords are not saved , ALL settings made on modem is never saved.
[Reply]
@mohammed irfan
mp.bsnl.co.in/bb/wa3002g4/wa3002g4.htm
last post here for your problem.
[Reply]
Mohammed Irfan,
like you said the ITI modem is stupid and worthless(thank god i only rented it).I already got the same problem and reported it with BSNL.The replacement is still to arrive.
FYI try resetting to factory default and then updating the settings from a backed up setting file(gets tiresome when done manually)if you really need to log on.
[Reply]
I am having a BSNL broadband LAN connection. Do I require a dial-up connection?? Sometime LAN connection disconnecting. If anybody know something about this please clarify. Your reply will be much appreciated.
[Reply]
hello all, am new here, but will be visiting this often, I want to know that which modem is best to purchase from market if i want to purchase wi fi modem, i for some reasons dont want to go for bsnl provided modems as first of all i applied for type 2 modem, they gav type 1 modem
, let me know plz
[Reply]
Also Mohammed Irfan if you are so desparate try a utility that comes in the BSNL Config CD
“X:\cpe-data\ITI\Drivers\PPPoE_Drivers\WinXP\PPPoESetup.exe”
in th CD and use it to dial into internet.Saved me many a time but cant implement other settings like NAT.So if you use P2P it will work at a reduced speed only.
[Reply]
@Alfred ,
yes I have spotted that software but all I need to do is to create a connection on my pc manually using a PPoE connection and dialling.. But yes , I dont like that type of authenication since only one line can be used and other pcs cannot conenct simulatenously.
Thanks for your info though.
[Reply]
I have a DNA-A211-I ADSL2+ Modem. It went fo repair by BSNL and they exchanged it for another. Now I cannot access the user settings (http://192.168.1.1) as the default user name and password were changed by the previous user. BSNL are unable to help. How can I reset the password?
Thanks
Pradeep
[Reply]
let me know.
i have a ADSL connection with home plan, when i conect tree computer same time to internet.will be decreas my connection speed?
[Reply]
let me know.
i have a ADSL connection with home plan, when i conect three computer same time to internet.will be decreas my connection speed?
[Reply]
Hi Amit/Everybody,
I have just got the BSNL connection with DNA-A211-1 ADSL2+ modem. I wanted to setup PPPoE and access net on my WiFi phone (iPhone). However I am not able to access 192.168.1.1. When I am connected and browsing internet, i can access 192.168.1.1 or even ping 192.168.1.1 but i cann’t go ahead using user name and password as admin (even tried “password” and keeping it blank). When i am not connected it does not ping. It can’t even access 192.168.1.1 to display a dialog box for user name and password.
Please help, if i can’t access net on my phone then its useless having a wifi modem.
Can write on kalpesh03@gmail
Thanks
Kalpesh
[Reply]
PLZ HELP ME…
Hi frnds,
I use BSNL broadband. My problem is that I cannot access internet from my laptop where as I can connect from my desktop computer easily. I’m not talking about connecting simultaneously. When I try to connect from my laptop, the IP address generated is 169.254.*.*, which is a self-assigned address by the operating system (Windows XP) when it cannot access the DHCP. I tried repairing connection, did all troubleshooting methods that I got during hours of googling. Anyway there is no change.
I dont have any idea what the problem is. My friend suggested that the ADSL modem stores the MAC address of my desktop computer in it and hence there is address mismatch when i try to connect from my laptop. Is it so? How to solve this? Is it because of PPPOE configuration?
plz respond.. I’m in trouble as my desktop is not working now!
Thanks.
[Reply]
i am using bsnl DNA-A211-I modem and want to connect my n95 to it by wifi.please give me a step by step process.
[Reply]
I have just got the BSNL connection with DNA-A211-1 ADSL2+ modem. I wanted to setup PPPoE and access net on my WiFi phone (nokia 5800).how it is done plese tell me.when i connect modem to my phone.it say’s connected but when i surf web it say’s no gate way reply.what is the problem please tell
me
[Reply]
@mohammed irfan, I have a exact same problem and there is not much help from BSNL regarding the same. It would be much appriciated if u could post the solution once u have it. Thanks in advance.
[Reply]
Unni it seems that the DHCP server option is not enabled in your modem therefore you are not getting it right on your laptop.
Change the LAN setting manually in your laptop i presume that will do the trick.
Open control panel => Network connections => local Area connection => properties => Click internet protocol Tcp/Ip => properties => use the following IP addresses => IP address 192.168.1.10 =>subnet mask 255.255.255.0 =>default gateway 192.168.1.1 =>use the following dns server 192.168.1.1 and then OK in each window.
[Reply]
i have bsnl broadband connection at my home. now i want to connect my cousin pc with the same also.i buy switch & cable connected both pc but only my pc is connecting to net not the second one.
what to do
please tell meeeeeeeeeeeee
its urgentttttt
[Reply]
Shank said:
“Unni it seems that the DHCP server option is not enabled in your modem therefore you are not getting it right on your laptop.
Change the LAN setting manually in your laptop i presume that will do the trick.
Open control panel => Network connections => local Area connection => properties => Click internet protocol Tcp/Ip => properties => use the following IP addresses => IP address 192.168.1.10 =>subnet mask 255.255.255.0 =>default gateway 192.168.1.1 =>use the following dns server 192.168.1.1 and then OK in each window.”
Shank,
it worked!!! and i’m typing this from my laptop..
i dont know how to thank u..
Thanks a lot, my dear friend.
But one more doubt- In the status window the IP is shown as 192.168.1.10 (as we have given in tcp/ip properties) and the address type is shown as manually configured. So my doubt is that will I be able to connect always using this IP? Since we are given dynamic IP, won’t there be someone using the same address? Also, is there any problem with BSNL for configuring IP and DHCP manually (since thats not the way they need us to use this connection..)
Please answer my question eventhough u feel its a blunder…
Thank you..
[Reply]
Shank,
it worked! thanks a lot..
my previous comment was blocked for moderation. so i’m posting it again.
I have one more doubt- can I connect to Internet always using this configuration? I’m asking this coz BSNL is offering dynamic IP, and wont there be someone using this IP already when I try to connect? also, is there any problem with BSNL to use their connection in this way?(as they intend us to obtain dynamic IP and we are trying to set an IP manually)
Please answer this even though u feel my question is a blunder..
Thank you
[Reply]
I cant understand why people not well conversant with tweaking electronic devices do so and blame the service provider and most of the time in deference to the private operator. I just started using the BSNL BB H500C. I just connected the WA3002G4 4 10/100 ethernet/WiFi and it worked fine. Earlier, in my area the ISP was not offering BB because it was not feasible. I am very happy with the PSU and would recommend all. There are instances when BB is not available so do the private ISPs. We need to appreciate how essebee is able to handle so many ’semi techs’ withought raising his temperature.
I pay for the service still I think I need to talk in favour of the the Co which is doing so much specially coverage as against nil from the private operators.
[Reply]
@unni
[quote]Shank,
it worked! thanks a lot..[/quote]
IF it works don’t repair it !
Always mention modem/router model make.
Take screen
shots of your modem settings
for future use.
If any problem upload the jpg
picture/s in http://www.tinypic.com
and give the link here.
Have a nice day.
[Reply]
Hi
Hmm…
Hi frnds,
I use BSNL broadband. My problem is that I cannot access internet from my Apple iphone.
I have no idea about iphone wifi settings.
I am using UTSTARCOM WA3002G4 modem and want to connect my IPHONE to it by wifi.please give me a step by step process.
Thanks
………………………Praveen
praveenbkone@gmail.com
[Reply]
HI i bought bsnl broad band connection modem model-dna-a211-i,ADSL2+,DOWNLOAD SPEED IS UPTO 2mbps but wn i start to download i will got max is 10 kbps if any one knew how to change router…
[Reply]
More Info related to the problem
——————————————————————————–
Thanks for the prompt reply. I’ll explain my problem in detail. I’ve a PC that runs on Windows XP and
a desktop pc Windows XP SP2. I’ve successfully connected my pc.However when I’m trying to connect my PC to broadband via ethernet I’m unable to do so. The network
I think the problem is with the IP address that my PC connection is acquiring when connected.
ipconfig on PC shows
Auto configuration IP address :169.254.161.99
Subnet Mask : 255.255.0.0
Default gateway: 169.254.161.99
ipconfig on Laptop shows
IPv4 Address. . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
Pleal Solve Problem
My modem is NOKIA SIEMENSS NETWORKS C2110 (FROM BSNL)
[Reply]
how to create a wireles bridge using two identical DNA-A211-I. One is connected to the ADSL. i want to use the secnd as a bridge to extend the range.
[Reply]
im from jharkhand having a bsnl broadband new connection, my desktop com. being hanged as i connect to the broadband, while never any problem came when i used airtel or smart net, plz help i hv iti ADSL 2+ modem….
[Reply]
hi,
I have TATA Indicom’s Telenet TNDSL 2120. Now my first question is can i use same router with BSNL? If yes then i want modem setting for bsnl broadband.
[Reply]
@Jwalant
YES.
CHANGE vpi/vci TO 0 AND 35.
USE BSNL iD AND pw.
SAVE AND REBOOT.
[Reply]
HI,
I have a BSNL broadband internet connection. It has a wireless and a wired port. I need help in configuring my wireless network such that my Nokia N81 can connect to the internet using this connection
[Reply]
I have Sterlite BSNL Router (smartax MT882) I need the USB Driver for XP2
PLZ HELP ME. THANKS
[Reply]
Ya i’m having this weird “Reset problem” too. i’m in bangalore and have the ITI DNA- A211-I modem .. at first it only reset if the power went off, so i resolved that by connecting it to the UPS … however the settings still got reset after 24-48 hrs.. i’ve been using the “update” method to restore my settings with a backup file.. and it was fine for a few months, until yesterday, when it stopped applying the settings! no matter what i do- manual entry or use the backup files, it just refuses to save the settings, everytime i apply the settings and save and reboot, it just goes back to original settings
[Reply]
DNA211-I
ID/password settings not SAVED ETC.
seems to be a regular complaint.
Please see under Maintenance
tr_069 client. If seen disable it.
Probably another menu item here SNMP
Disable this also.
Airtel ONLY uses tr_069 CLIENT . >
.
[Reply]
Ok i solved my problem, i just flashed my modem’s firmware with drivers i got from semindia.in/SemIndiaSystems_DwnLoad.htm
i was able to restore my settings through the “update settings” feature using a backup file..
modem works great now
[Reply]
sorry forgot to mention this in the above post,
flashing any device’s firmware is extremely dicey, do so at your own peril!
Basically if the device loses power during the 2minutes it takes for the flashing period, it will be “bricked”(rendered unsalvagable) so be careful.
[Reply]
A software update is available in semindia web site.
for the DNA211-I model. reported improvement in saving settings etc.
[Reply]
sorry.
was little busy on YM. the link is given below.
semindia.in/SemIndiaSystems_DwnLoad.htm
[Reply]
hi guys. I have a siemens C2110 modem. My problem is my younger brother accidentally click delete in the modem configuration (the one where Disconnect/connect was set). Now i can’t connect anymore. Can u pls tell me the step by step way to configure it again pls? Btw i had already change my bsnl acc password.. do I hv to use my account password or the ‘password’ one??
[Reply]
my modem was provided by bsnl.
[Reply]
I have a UT300R2U(900 UL) modem and Win XP SP 3 comp.
My problem is that the modem keeps re-starting(power goes on-off) when the phone line(from splitter) is connected to DSL socket in modem and the Lan wire(RJ 45) is connected between modem and comp.
When the wires are connectes individually, i.e; splitter to modem (or) modem to comp., the modem is steady and the modem doesn’t restart again and again.
But, one needs both the above connections to connect to the net!!
What is the problem? Why does it keep re-starting? There is no problem with the phone line.
[Reply]
hi guys.i had tried the ip adress 192.168.1.1 and then typed the username admin and password admin.then i went through the advanced setup and clicked on wan button then i actually removed all my configuration settings and saved and rebooted now i cannot access the internet.then i clicked on add button then maked a PPoE connection now i can connect through the connection by just putting the modem on but i can access it only on my computer but not laptop . i want to reconfigure all the settings and connect the internet manually by dialing . please provide me steps to again make settings and connect maually.my modem name is
dna-a211-l
[Reply]
Saif, go to this link, and follow the steps for configuring your wifi. its pretty well explained mydataone.net/router/wa3002g4.html
[Reply]
@saif
No idea bout your modem/wifi router.
anyway see these web site/s also.
mp.bsnl.co.in/bb/wa3002g4/wa3002g4.htm
chennai.bsnl.co.in/BBS/WA3002G4.htm#Wireless_security
@ amit
scrolling down the page is time consuming.
The latest post should appear first and
option to reply at the top.
or only this month’s.
will not continue participation here.
GOOD BYE everybody.
Thanks for the cooperation.
[Reply]
how to configure the BSNL modem with static IP ?
[Reply]
i have D link GLB-502T modem…..it was working fine when suddenly one day…PPPoE link disappeared(not ADSL)…….then connected another modem of diff company….the link is coming in that modem(ADSL and PPPoE)………when again connected d link the pppoe link is not coming…..tried all internet settings (VPI,VCI) but still no PPPoE link is coming…i can`t understand why it is working on other modem but not in dlink……….can anyone help me..dlink helpline number no one picks it up…..checked http://www.dlink.co.in no use………PLZZZ HELP
[Reply]
heyyy i have a nokia 5800 but can’t connect it to my bsnl modem dna a211l…..please help me …please
[Reply]
i have connected 2 pc using lan along with bsnl brodband connection after restrat pc or disconnected, everytime i haveto connect internet gateway. i cant not use net without connect intenet gateway so plese help me
[Reply]
hello…
i jst applied for the bsnl home 750ul plan and i am having BEETEL 450bx1 which i got from my frnd who ws using airtel…in oder to use beetel 450 as mine modem wht shud i do anwnser me??pls
[Reply]
@mandeep mydataone.net/router/wa3002g4.html
change vpi vcoi to 0 and 35
[Reply]
Sir,
I am having problem connecting to BSNL internet through my system. I want to connect to BSNL wirelessly through my desktop.
Configuration:
Beetel ADSL modem connected to Phone line(through RJ11)
Dlink Wireless Router connected to ADSL modem (through RJ45)
Intel PC Core2Duo, XP(SP2)OS, PCI Wireless card DLINK(DWA 510)
[Reply]
JSM Reply:
July 8th, 2009 at 3:50 pm
@Shiva, haai man am jsm from orisa.U try providing ip to the wirless connection at ur network place
[Reply]
If any Problem related to BSNL Broad Band e-mail me on jtobbkyn2@bsnl.in (myself Patil JTO Broadband Kalyan)
[Reply]
TO ESSBEBE(The Solutionist)
Modem in use – BSNL DNA-A211-1
Tariff Plan – BSNL Home Unlimited 750/-
Location – Hyderabad
Respected Sir,
I have two concerns i hope to get immediate response to:
1> I am using a PC and a LAPTOP(dell inspiron 1525),My wifi Router is effectively transmitting Wireless Broadband Internet connection to both the systems,however i want to Secure the Broadband Internet Transmition to my systems alone,so that other systems in the same vicinity (neighbours laptop) cant use my Wireless Broadband Internet connection……..Kindly direct me the settings insted of directing me to any weblinks.
2>I would also like to make sure that the Broadband Internet Download speed is equally shared between both the systems,as i am under the impression that my laptop is able to download faster than my PC although my PC is working effectivly,leaving no reason for slow download to my knowledge……..(Broadband Internet Download speed provided,256Kbps = 128Kbps + 128Kbps,Devision preferd)
[Reply]
see this link;
broadbandforum.in/bsnl-broadband/50052-utstar-wa3002-g4-vade-mecum-quick-reference/#post331246
This post contains many links and will help in settings of
BSNl modems ( NON WIFI ) as well as wif i routers.
Please add to book marks and refer when needed.
Another one : for port forwarding
indiabroadband.net/bsnl-broadband/21422-sl2-141-portforwarding-quick-reference.html
[Reply]
Can anyone provide me bsnl type 2 wi-fi modem drivers please..?
[Reply]
@abhinav
You should always mention the modem model and make.
presume you need USB drivers for that type 2 modem.
Type II is wifi enabled, and unlikely there will be an USB port.
In any forum, don’t expect the contributors to do all research for you. will check and post reply later. after searching in Google/forums etc.
sorry unable to help now. .
[Reply]
@abhinav
You should always mention the modem model and make.
presume you need USB drivers for that type 2 modem.
Type II is wifi enabled, and unlikely there will be an USB port.
In any forum, don’t expect the contributors to do all research for you. will check and post reply later. after searching in Google/forums etc.
sorry unable to help now.
Only type Ii with usb port WA1003A
http://www.calcutta.bsnl.co.in/dataoneinstall/mdm05.html.
[Reply]
Dear Essbebe,
I have a BSNL Broadband connection using UTStarcom wa3002g4 modem & it works well on my laptop. Recently I bought Nokia 5800 mobile. I want to use wifi connectivity on this mobile. UTStarcom AP is getting connected but I can’t get internet cnnection but I get messege “No gateway reply”.
Please explain me how to configure further my Dataoe ID & passwrd so that I can connect internet.
Thanks,
Lalit
[Reply]
@Essbebe
I have ITI DNA A211-L wifi modem. The original power adaptor supplied by bsnl got bust. The adaptors available in the market have power rating of O/p:10 volt DC ,1 Ampere.The orignal one had rating : 10 v Dc but 750 mA. The salesguy said that this should work fine. Should I go ahead and purchase one or else where can I find one.
[Reply]
Dear Essbebe,
HELP REQUIRED !!!!!!!
I have got a mtnl connection, my plan is unlimited home 256 kbps connection. For quite some time i was using Beetle 220 BX ADSL2+ modem to connect to the internet and it was working perfectly. Now the problem that arised recently is that the two LEDS (green – data and green -PC/usb) on my modem keep blinking continuously even when i am not using the internet and has slowed down my speed drastically to 5-10 kbps……Now i am unable to understand whether my connection is downloading some virus or somethings gone wrong with its settings…..plzzz help !!! coz it doesnt stop blinking….n even if i reset the modem, once it is connected it again begins to blink i can almost not accesss thenet at all
[Reply]
@paresh
You can use it BUt Observe Polarity corectly
whether plug has correct polarity .
Rikzy:
Under maintenance check whether
client TR_069 is enabled. Disable it.
Also “SOAP” disable.
Ensure all phones connected AFTER the ADSL splitter ONLY.
[Reply]
I checked….my phones r connected after the adsl splitter…..i didnt find any option of maintenance in my modem configuration…..
all i have there is device info, dsl status, wan, lan, dsl settings, reboot. So i couldn’t locate TR_069 client or SOAP any where in these…..
Any other solutions !!!
[Reply]
hey guys,
I need to know if the dynamic DNS settings is available in Siemens C2110 modems? Could anyone help me?
[Reply]
I have BSNL broadband with WIFI ADSL modem SL2_14(Nokia Siemens Networks),Now I purchase Nokia N79 a wi-fi enabled phone But I was unable to connect my mobile with internet using this modem please guide me for it’s set up on my phone,after entering all values when I connect it it display on my mobile screen error code-400,bad command.waiting for all valuable & useful replies.Thanks
[Reply]
guys,
I have a BSNL broadband connection 750 plan. I use bitcomet download manager. I am in a LAN network. I had portforwarded and was getting good download speed. When they came for repair they added PPPOE (don’t know what it is. Now my listen port is blocked. I lost speed. I did all i can. It remains blocked. HELP!!!!!!!!!!!
[Reply]